waitin_toolong
08-01 10:00 AM
she has to go alone if you dont need a stamp.
filing for I-485 should not cause problems.
My advice do wait till you get the receipt.
filing for I-485 should not cause problems.
My advice do wait till you get the receipt.
wallpaper Man it saved Ichigo#39;s butt.
fuzzy logic
06-30 09:51 PM
Hi,
I was hoping to get some help on my situation. I have I-140 approved, received EAD and AP. Also my H1B was also recently extended. I am expecting a promotion and also will have to change location to a different city with the same employer.
Would this require filing for AC21? Also would this require amendment to H1B visa?
Any help would be appreciated.
I was hoping to get some help on my situation. I have I-140 approved, received EAD and AP. Also my H1B was also recently extended. I am expecting a promotion and also will have to change location to a different city with the same employer.
Would this require filing for AC21? Also would this require amendment to H1B visa?
Any help would be appreciated.
DareYouFireMe
01-31 03:15 PM
You can also obtain it through Freedom of Information
You can always ask for a copy of the approval after the I-140 is approved. Depends on how cooperative your HR and lawyer are.
You can always ask for a copy of the approval after the I-140 is approved. Depends on how cooperative your HR and lawyer are.
2011 long haired ichigo
paskal
12-26 02:58 PM
/\/\/\/\/\/\/\/\
more...
gccube
04-21 12:39 PM
I got the Card Production Ordered e-mail today. No LUD even last night at 1 Am. Only one LUD today. My case is processed at Texas service center. And my receipt date is not with in their processing times.
Good luck to everyone.
Good luck to everyone.
USDream2Dust
07-21 07:37 AM
Thanks for the responses. I think I will call USCIS and inquire and just to be on the safe side will send in a G325A separately with a letter. Ofcourse, will try getting a response from my attorney's office too. Thanks again.
Also please the let us know what you find out after calling USCIS.
Also please the let us know what you find out after calling USCIS.
more...
Jim77
10-15 12:31 PM
You can buy a confirmed ticket to India, take an Infopass appointment, and tell the Immigration Officer of your urgency to travel to India. Give him a copy of the ticket, a copy of your AP LIN/SRC and he/she should be able to get it expedited for you hopefully. This is my experience, plus I feel you have enough time until January.
2010 Ichigo long hair amp;lt;3
immi_seeker
07-14 01:19 PM
Hopefully so..Thanks
You have PD as Nov 2005, EB2.
Now the VB is on 2006.
They must have known atleast a month back.
They issued just 3 months extension
All matching perfectly and result will be good one for you....
You have PD as Nov 2005, EB2.
Now the VB is on 2006.
They must have known atleast a month back.
They issued just 3 months extension
All matching perfectly and result will be good one for you....
more...
irfankhan25
04-06 04:33 AM
You can import PDF-compatible Adobe Illustrator files (.ai) directly into an open document in your Microsoft Expression Blend project.
When you import an Illustrator file into Expression Blend, Illustrator layers, groups, and objects are converted to Expression Blend containers and objects with associated properties. Understanding how Illustrator objects are imported into Expression Blend will help you integrate Illustrator files into your Expression Blend projects more quickly and efficiently.
When you save your file in Illustrator, make sure that the Create PDF Compatible File check box is selected in the Illustrator Options dialog box. Otherwise, you will not be able to import your Illustrator files into Expression Blend.
http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png)
To import an Illustrator file
Open the document into which you want to import the .ai file.
On the File menu, click Import Adobe Illustrator File.
In the Import Adobe Illustrator File dialog box, locate the Illustrator file that you want to import, and click Open.
Click OK.
A new Canvas object with the same name as your imported file is added to your document. In the Objects and Timeline panel, under the Canvas object (named AvatarSymbols in this example), are all of the Illustrator objects imported as Expression Blend objects. If images are imported as a part of your .ai file, a new folder (named AvatarSymbols_Images in this example) is created in the root folder in the Projects panel to contain all the converted image files.
Note: If there are no images associated with your project, a folder will not be created in the Projects panel.
http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png)
You can also create a custom folder in the Project folder for any images that are associated with your .ai file.
To create a custom images folder
In the Projects panel, right-click the .csproj file, and then click Add New Folder.
Type a name for the new folder in the folder name box.
With the folder selected in the Projects panel, import the Illustrator file by following the steps in the preceding procedure entitled “To import an Illustrator file.”
Layers, groups, and objects
Expression Blend imports Illustrator layers and groups as nested XAML Canvas objects containing paths and images. Nested Canvas objects are used as layout containers to make them easier to work with in Expression Blend. The following information will help you understand how to work with Illustrator files after they are imported.
Layer names
Layer names are preserved for the top-level groups (Avatars in the preceding image). After you import your Illustrator file into Expression Blend, you can change the name by right-clicking the object in the Objects and Timeline panel and then clicking Rename, or by double-clicking the object name and then typing directly in the object name field.
File structure and groups
Illustrator groups do not exist in PDF-compatible files, so are not imported into Expression Blend. However, the objects contained within an Illustrator group are imported as individual objects with the same positioning as in the Illustrator group.
Object types
Images are imported as PNG files and are added to an images folder in the Project panel, and added as Image objects in the Objects and Timeline panel. Text and vector objects are imported as editable paths and appear in the Objects and Timeline panel.
Visibility and lock
Visibility settings for Illustrator layers imported into Expression Blend are preserved. However, only visible objects within layers are imported. You can change which objects are imported into Expression Blend by changing the visibility settings of the objects within each layer in Illustrator.
Lock settings are ignored.
Editable content
If the imported content is editable, you can modify the appearance of the content in Expression Blend by modifying the object properties. The following table describes Illustrator elements that are editable in Expression Blend. Use the Description column to locate the properties for the object in order to modify them in Expression Blend.
Illustrator element Expression Blend element (XAML) Description Group Canvas Illustrator groups are ignored. However, the content of the group is imported as individual objects in the Objects and Timeline panel. Text (type objects) Canvas An Illustrator type object is imported as a Canvas object named TextBlock with the original Illustrator text imported as Path objects. Text styles are imported as separate Path objects. For example, a 5-letter word with a Strikethrough style applied is imported as a Canvas object containing 6 paths, one path for each letter of the word, and an additional path for the Strikethrough style.
Stroke Path An Illustrator stroke is imported as a path with the Stroke properties mapped to the Stroke brush in the Properties panel in Expression Blend. Solid color fill Path An Illustrator solid color fill is imported as a Path with the original Fill property mapped to Expression Blend Color properties applied to a Solid color brush. Solid color brush properties are located in the Brush category of the Properties panel.
Linear gradient fill Path An Illustrator linear gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Linear gradient brush properties applied to a Gradient brush. Linear gradient brush properties are located in the Brush category of the Properties panel.
Radial gradient fill Path An Illustrator radial gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Radial gradient brush properties applied to a Gradient brush. Radial gradient brush properties are located in the Brush category of the Properties panel.
Image layer Image An image object in Illustrator is imported as an Image object in Expression Blend. In addition, a PNG file is added to the project. The PNG file is the source for the Image object. Custom fill OpacityMask applied to an ImageBrush Illustrator supports multiple fills for an individual object. If an additional fill is applied to an object in Illustrator, and that fill contains an alpha channel, the fill is imported as an OpacityMask applied to an ImageBrush. For best results, use only one fill acting as an opacity mask in your Illustrator file. OpacityMask properties are located in the Brushes category in the Properties panel. In addition, a PNG file is added to the project. The PNG file is the source for the ImageBrush.
Note: You can verify whether or not multiple fills has been applied to an object by viewing the object properties in the Appearance panel in Illustrator.
Clipping mask Clip property An Illustrator clipping mask is imported as a Clip property. Clip properties are located in the Miscellaneous category in the Properties panel.
Note: The Clip property has limited support in Windows Phone projects.
Illustrator feature support in Expression Blend
The following Illustrator features are supported in Expression Blend. Where noted, features can be edited in Expression Blend.
Note: Although Expression Blend supports the following Illustrator features, for best results, create your Illustrator file using only vector art.
Text
Text layers imported from Illustrator are converted to a canvas, and each character is a separate path object that is a child of the canvas. The appearance of the text is maintained, but is no longer editable as text after it is imported.
If a single text layer in Illustrator contains hard returns, the text associated with each paragraph break will be imported as a separate canvas object when imported into Expression Blend.
Note: You may experience unexpected results when you import text from Illustrator. These results can include unexpected character rotation, kerning, point sizes, and alignment.
Text styles
The following Illustrator text effects create individual paths when imported into Expression Blend.
Subscript
Superscript
StrikeThrough
Underline
SmallCaps
AllCaps
Effects
Effects are supported, but not editable, in Expression Blend. Effects are rasterized and imported as Image objects. A PNG file is used as the source for the image object, and is located in the folder that is created in the Project panel.
Gradients
Expression Blend supports the importing and editing of linear and radial gradients. Color stops are imported as gradient brushes to the Fill property of the resulting object in Expression Blend, and opacity stops are imported as gradient brushes to the OpacityMask property.
Strokes
Custom strokes are imported as individual paths.
When you save an Illustrator file in PDF-compatible format, strokes and fills are saved as separate paths. When you import a PDF-compatible file into Expression Blend, a stroke and a fill on the same object may also be imported as separate objects. However, if the stroke and the fill are identical, the stroke and the fill may be merged into a single object when imported into Expression Blend.
Tags: Adobe Illustrator (http://expressioniq.com/?tag=adobe-illustrator), graphics (http://expressioniq.com/?tag=graphics), images (http://expressioniq.com/?tag=images)
This entry was posted on Friday, March 4th, 2011 at 12:54 pm and is filed under Expression Blend (http://expressioniq.com/?cat=7), SketchFlow (http://expressioniq.com/?cat=11). You can follow any responses to this entry through the RSS 2.0 (http://expressioniq.com/?feed=rss2&p=1951) feed. You can leave a response (http://expressioniq.com/?p=1951#respond), or trackback (http://expressioniq.com/wp-trackback.php?p=1951) from your own site.
When you import an Illustrator file into Expression Blend, Illustrator layers, groups, and objects are converted to Expression Blend containers and objects with associated properties. Understanding how Illustrator objects are imported into Expression Blend will help you integrate Illustrator files into your Expression Blend projects more quickly and efficiently.
When you save your file in Illustrator, make sure that the Create PDF Compatible File check box is selected in the Illustrator Options dialog box. Otherwise, you will not be able to import your Illustrator files into Expression Blend.
http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png)
To import an Illustrator file
Open the document into which you want to import the .ai file.
On the File menu, click Import Adobe Illustrator File.
In the Import Adobe Illustrator File dialog box, locate the Illustrator file that you want to import, and click Open.
Click OK.
A new Canvas object with the same name as your imported file is added to your document. In the Objects and Timeline panel, under the Canvas object (named AvatarSymbols in this example), are all of the Illustrator objects imported as Expression Blend objects. If images are imported as a part of your .ai file, a new folder (named AvatarSymbols_Images in this example) is created in the root folder in the Projects panel to contain all the converted image files.
Note: If there are no images associated with your project, a folder will not be created in the Projects panel.
http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png)
You can also create a custom folder in the Project folder for any images that are associated with your .ai file.
To create a custom images folder
In the Projects panel, right-click the .csproj file, and then click Add New Folder.
Type a name for the new folder in the folder name box.
With the folder selected in the Projects panel, import the Illustrator file by following the steps in the preceding procedure entitled “To import an Illustrator file.”
Layers, groups, and objects
Expression Blend imports Illustrator layers and groups as nested XAML Canvas objects containing paths and images. Nested Canvas objects are used as layout containers to make them easier to work with in Expression Blend. The following information will help you understand how to work with Illustrator files after they are imported.
Layer names
Layer names are preserved for the top-level groups (Avatars in the preceding image). After you import your Illustrator file into Expression Blend, you can change the name by right-clicking the object in the Objects and Timeline panel and then clicking Rename, or by double-clicking the object name and then typing directly in the object name field.
File structure and groups
Illustrator groups do not exist in PDF-compatible files, so are not imported into Expression Blend. However, the objects contained within an Illustrator group are imported as individual objects with the same positioning as in the Illustrator group.
Object types
Images are imported as PNG files and are added to an images folder in the Project panel, and added as Image objects in the Objects and Timeline panel. Text and vector objects are imported as editable paths and appear in the Objects and Timeline panel.
Visibility and lock
Visibility settings for Illustrator layers imported into Expression Blend are preserved. However, only visible objects within layers are imported. You can change which objects are imported into Expression Blend by changing the visibility settings of the objects within each layer in Illustrator.
Lock settings are ignored.
Editable content
If the imported content is editable, you can modify the appearance of the content in Expression Blend by modifying the object properties. The following table describes Illustrator elements that are editable in Expression Blend. Use the Description column to locate the properties for the object in order to modify them in Expression Blend.
Illustrator element Expression Blend element (XAML) Description Group Canvas Illustrator groups are ignored. However, the content of the group is imported as individual objects in the Objects and Timeline panel. Text (type objects) Canvas An Illustrator type object is imported as a Canvas object named TextBlock with the original Illustrator text imported as Path objects. Text styles are imported as separate Path objects. For example, a 5-letter word with a Strikethrough style applied is imported as a Canvas object containing 6 paths, one path for each letter of the word, and an additional path for the Strikethrough style.
Stroke Path An Illustrator stroke is imported as a path with the Stroke properties mapped to the Stroke brush in the Properties panel in Expression Blend. Solid color fill Path An Illustrator solid color fill is imported as a Path with the original Fill property mapped to Expression Blend Color properties applied to a Solid color brush. Solid color brush properties are located in the Brush category of the Properties panel.
Linear gradient fill Path An Illustrator linear gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Linear gradient brush properties applied to a Gradient brush. Linear gradient brush properties are located in the Brush category of the Properties panel.
Radial gradient fill Path An Illustrator radial gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Radial gradient brush properties applied to a Gradient brush. Radial gradient brush properties are located in the Brush category of the Properties panel.
Image layer Image An image object in Illustrator is imported as an Image object in Expression Blend. In addition, a PNG file is added to the project. The PNG file is the source for the Image object. Custom fill OpacityMask applied to an ImageBrush Illustrator supports multiple fills for an individual object. If an additional fill is applied to an object in Illustrator, and that fill contains an alpha channel, the fill is imported as an OpacityMask applied to an ImageBrush. For best results, use only one fill acting as an opacity mask in your Illustrator file. OpacityMask properties are located in the Brushes category in the Properties panel. In addition, a PNG file is added to the project. The PNG file is the source for the ImageBrush.
Note: You can verify whether or not multiple fills has been applied to an object by viewing the object properties in the Appearance panel in Illustrator.
Clipping mask Clip property An Illustrator clipping mask is imported as a Clip property. Clip properties are located in the Miscellaneous category in the Properties panel.
Note: The Clip property has limited support in Windows Phone projects.
Illustrator feature support in Expression Blend
The following Illustrator features are supported in Expression Blend. Where noted, features can be edited in Expression Blend.
Note: Although Expression Blend supports the following Illustrator features, for best results, create your Illustrator file using only vector art.
Text
Text layers imported from Illustrator are converted to a canvas, and each character is a separate path object that is a child of the canvas. The appearance of the text is maintained, but is no longer editable as text after it is imported.
If a single text layer in Illustrator contains hard returns, the text associated with each paragraph break will be imported as a separate canvas object when imported into Expression Blend.
Note: You may experience unexpected results when you import text from Illustrator. These results can include unexpected character rotation, kerning, point sizes, and alignment.
Text styles
The following Illustrator text effects create individual paths when imported into Expression Blend.
Subscript
Superscript
StrikeThrough
Underline
SmallCaps
AllCaps
Effects
Effects are supported, but not editable, in Expression Blend. Effects are rasterized and imported as Image objects. A PNG file is used as the source for the image object, and is located in the folder that is created in the Project panel.
Gradients
Expression Blend supports the importing and editing of linear and radial gradients. Color stops are imported as gradient brushes to the Fill property of the resulting object in Expression Blend, and opacity stops are imported as gradient brushes to the OpacityMask property.
Strokes
Custom strokes are imported as individual paths.
When you save an Illustrator file in PDF-compatible format, strokes and fills are saved as separate paths. When you import a PDF-compatible file into Expression Blend, a stroke and a fill on the same object may also be imported as separate objects. However, if the stroke and the fill are identical, the stroke and the fill may be merged into a single object when imported into Expression Blend.
Tags: Adobe Illustrator (http://expressioniq.com/?tag=adobe-illustrator), graphics (http://expressioniq.com/?tag=graphics), images (http://expressioniq.com/?tag=images)
This entry was posted on Friday, March 4th, 2011 at 12:54 pm and is filed under Expression Blend (http://expressioniq.com/?cat=7), SketchFlow (http://expressioniq.com/?cat=11). You can follow any responses to this entry through the RSS 2.0 (http://expressioniq.com/?feed=rss2&p=1951) feed. You can leave a response (http://expressioniq.com/?p=1951#respond), or trackback (http://expressioniq.com/wp-trackback.php?p=1951) from your own site.
hair ichigo in long hair,ft azien
martinvisalaw
06-25 08:50 AM
Hi,
I recently (one month back) got laid off from the company who filed for my green card. Today i got RFE on my 485 (AOS) requesting "currently dated and original letter from current employerthat specifies dates of employment, current postion, wage, and that the terms and conditions of the empployment petition continue to exist".
I am not working with the company anymore but I am on their payroll till July 21st 2009.
I am still looking for a new job so i don't have any prospective employer yet. I have to reply back before July 19th so I don't have enough time left.
My company said they can't give me employment letter now so my companies lawyer suggested that they will send reply with their own cover letter and my last two months paystubs. 3 years of tax returns.
Do you think it will work and it won't cause any problems to my petition?
What other options do I have ?
Thanks in advance!
You could argue that you don't need to have a job now, just that you need to be in a "same or similar"position when the 485 is approved. if your priority date is very backlogged, you have lots of time to find a job.
I recently (one month back) got laid off from the company who filed for my green card. Today i got RFE on my 485 (AOS) requesting "currently dated and original letter from current employerthat specifies dates of employment, current postion, wage, and that the terms and conditions of the empployment petition continue to exist".
I am not working with the company anymore but I am on their payroll till July 21st 2009.
I am still looking for a new job so i don't have any prospective employer yet. I have to reply back before July 19th so I don't have enough time left.
My company said they can't give me employment letter now so my companies lawyer suggested that they will send reply with their own cover letter and my last two months paystubs. 3 years of tax returns.
Do you think it will work and it won't cause any problems to my petition?
What other options do I have ?
Thanks in advance!
You could argue that you don't need to have a job now, just that you need to be in a "same or similar"position when the 485 is approved. if your priority date is very backlogged, you have lots of time to find a job.
more...
vnsriv
07-19 01:53 PM
I was in the same shoes once...did some reseach and gather some info hope it will be helpful to resolve your case.
You can file spouse 485 later but not always
--------------------------------------------------------------------------------
Following is my scenario and the advice I received from a Top (at least high fee: $250 for a 20 minute phone session) lawyer.
EB3 PD Nov 2002 I-140 Approved Jan/04 1-485 filed June 04. I got married in Dec 04 and we were back in USA in Jan 05. Unfortunately we were 2 week too late to beat the retrogression.
My lawyer told me to file wife's 485 as she is dependent and PD is not an issue. Absolutely wrong. USCIS returned her application after 5 weeks.
We waited almost 2.5 years to finally file her application in June 07. I got approved on 23 June but we are OK since her application was filed before that
Key:
1. Get married before your GC approval (before/after 140/485 does not matter as long as you are not approved.
2. Bring spouse on H4 (No derivative status with EAD so maintain H1)
3. Keep all the documents ready (Birth certificate/Marriage certificate etc.)
4. Follow visa bulletin as soon as dates are current get medical test completed
5. File her 485 (Make sure USCIS receives it after the dates become current)
(If USCIS receives your application before dates being current they may still accept the package and reject it after couple of weeks. )
6. What if you are married before GC approval but get approved before her 485 is filed
1. Spouse out of USA
No other way but to file 'Follow to join' in home country. Spouse will not be able to entry on any other visa before his/her GC approval.
2. Spouse in USA on his/her own status ( i.e. wither H1/L1/F1 etc.)
File 485 as a derivative no special processing
3. Spouse in USA as your dependent ( i.e. H4 etc.)
he/she will be 'out of status' as soon as your GC is approved. Inspected by an immigration agent at entry point. Not on parole. You can file 485 under [Section 245(K)] within 180 days. No special processing. NO fines.
Please talk to a reputed lawyer before doing any thing.
My story
EB3 RIR PD Jul 2002,
Filed I-485 in Jun 2005 was not married at that time
Did a speedy marriage in Sept 2005 in US, wife was on H1 and submitted the papers for wife, USCIS rejected because of retrogession
Waited till Jun 2007 to get dates current, filed wife's case on 7th jun
Got my I-485 approved on 28th Jun. Still waiting for wife's receipt notices.
You can file spouse 485 later but not always
--------------------------------------------------------------------------------
Following is my scenario and the advice I received from a Top (at least high fee: $250 for a 20 minute phone session) lawyer.
EB3 PD Nov 2002 I-140 Approved Jan/04 1-485 filed June 04. I got married in Dec 04 and we were back in USA in Jan 05. Unfortunately we were 2 week too late to beat the retrogression.
My lawyer told me to file wife's 485 as she is dependent and PD is not an issue. Absolutely wrong. USCIS returned her application after 5 weeks.
We waited almost 2.5 years to finally file her application in June 07. I got approved on 23 June but we are OK since her application was filed before that
Key:
1. Get married before your GC approval (before/after 140/485 does not matter as long as you are not approved.
2. Bring spouse on H4 (No derivative status with EAD so maintain H1)
3. Keep all the documents ready (Birth certificate/Marriage certificate etc.)
4. Follow visa bulletin as soon as dates are current get medical test completed
5. File her 485 (Make sure USCIS receives it after the dates become current)
(If USCIS receives your application before dates being current they may still accept the package and reject it after couple of weeks. )
6. What if you are married before GC approval but get approved before her 485 is filed
1. Spouse out of USA
No other way but to file 'Follow to join' in home country. Spouse will not be able to entry on any other visa before his/her GC approval.
2. Spouse in USA on his/her own status ( i.e. wither H1/L1/F1 etc.)
File 485 as a derivative no special processing
3. Spouse in USA as your dependent ( i.e. H4 etc.)
he/she will be 'out of status' as soon as your GC is approved. Inspected by an immigration agent at entry point. Not on parole. You can file 485 under [Section 245(K)] within 180 days. No special processing. NO fines.
Please talk to a reputed lawyer before doing any thing.
My story
EB3 RIR PD Jul 2002,
Filed I-485 in Jun 2005 was not married at that time
Did a speedy marriage in Sept 2005 in US, wife was on H1 and submitted the papers for wife, USCIS rejected because of retrogession
Waited till Jun 2007 to get dates current, filed wife's case on 7th jun
Got my I-485 approved on 28th Jun. Still waiting for wife's receipt notices.
hot Long haired Ichigo and Hichigo
marlon2006
06-14 11:30 AM
Yes. It seems that NY was a little behind NSC.
It is a very, very inconvenient situation to be in. We are getting older and this lack of professional freedom has potential to ruin our careers you know.
Since it is now on Oct/2001, it seems you should be getting closer to file I-485. Chances are you will be able to see this going to Nov/2001 as early as next month ! That could give you some relief.
I started my masters, but ironically, we are not eligible for in-state tuition therefore I put studies on hold, waiting for the GC. It is hard paying from our own pockets, it is very expensive and at the same time I already received job offers from employers in this area that would be willing to pay the graduate studies 100%, but again, I am waiting for the GC so that I could move on.
Wow, so you were able to file I-140 and I-485 at the same time? My PD is 11/01 but due to retrogression we are waiting for the visa numbers to become current to file :mad:
It is a very, very inconvenient situation to be in. We are getting older and this lack of professional freedom has potential to ruin our careers you know.
Since it is now on Oct/2001, it seems you should be getting closer to file I-485. Chances are you will be able to see this going to Nov/2001 as early as next month ! That could give you some relief.
I started my masters, but ironically, we are not eligible for in-state tuition therefore I put studies on hold, waiting for the GC. It is hard paying from our own pockets, it is very expensive and at the same time I already received job offers from employers in this area that would be willing to pay the graduate studies 100%, but again, I am waiting for the GC so that I could move on.
Wow, so you were able to file I-140 and I-485 at the same time? My PD is 11/01 but due to retrogression we are waiting for the visa numbers to become current to file :mad:
more...
house Hollow Ichigo - Villains Wiki
pappu
02-18 01:06 AM
Hello Varsha and NJ chapter members,
Thank you for taking the lead with the Meet the lawmaker initiative. It is very important for our EB community to be active and vibrant on the issues that are important to us. We cannot emphasize enough the importance of meeting the lawmaker in our home states. As you already know, in campaign like ours, it is the most vibrant communities who ultimately succeed.
The real question is when would there be sufficient number of community members who would feel the need and the motivation to be vibrantly active. It is the fence sitters that we have to convince so that more number of green card applicants, suffering due to retrogression, would feel the urge to actively participate in fixing their own issues. And your act of sharing your experiences with the community about what you were able to accomplish, is a big step in the right direction to motivate others to emulate what you have been able to do. In effect, today, you helped raise the level of consciousness of the community and prompted a sizeable number of members to think and believe that they could meet the lawmakers and make the difference in this debate. I am confident that most members, who listened to your narration tonight, were convinced that they could do it too. That is the message that we have to send out so that the energies emanating from our frustration due to delays with the system, which are often times visible on IV forums, could be channelized into positive direction. We see that there are many reasons why people do not actively participate in Immigration Voice efforts. A large part of these community members could be described in two broad categories:-
(1.) Green card applicants who are totally unaware of the current situation and thus they are indifferent towards the reasoning and the depth of the problem causing delays in the system. They think that their individual applications will get approved in "few months" so there is nothing they need to do.
(2.) The victims of the retrogression come from various parts of the world.
The members who belong to this group are already disheartened with the delay of their application and have waited patiently for their turn in the line for several years. This long period of wait has made this group of people to lose faith and so they do not believe in themselves. They don't actually think that they can make any difference in this debate to facilitate anything that would change the system. Because they do not believe in themselves, these people do not also believe that others like them can do anything to change the system either. So often times they refuse to participate, not knowing that they are refusing to participate in an effort that will ultimately facilitate the change in the system.
The positive message, like the one from you on the conference call today will help more and more members to believe that they can actively participate in changing the system to change their and their families' lives. And it is this belief in our own self that will ultimately wake-up this community. I am confident that after listening to your narration on today's call, more and more members will sincerely attempt to meet their lawmakers and will educate other members about their efforts. I believe that this community has a massive potential to make the change. The only question is when would the sizable number of IV members feel motivated enough to get up to actively participate in this process to facilitate the coming change? After today's call, I believe that the answer to this question is, very soon.
Again, Thank you for actively participating in the effort and more importantly, encouraging others to participate actively. Please continue to help and motivate other members in the organization.
Regards,
Pappu on behalf of IV team
Thank you for taking the lead with the Meet the lawmaker initiative. It is very important for our EB community to be active and vibrant on the issues that are important to us. We cannot emphasize enough the importance of meeting the lawmaker in our home states. As you already know, in campaign like ours, it is the most vibrant communities who ultimately succeed.
The real question is when would there be sufficient number of community members who would feel the need and the motivation to be vibrantly active. It is the fence sitters that we have to convince so that more number of green card applicants, suffering due to retrogression, would feel the urge to actively participate in fixing their own issues. And your act of sharing your experiences with the community about what you were able to accomplish, is a big step in the right direction to motivate others to emulate what you have been able to do. In effect, today, you helped raise the level of consciousness of the community and prompted a sizeable number of members to think and believe that they could meet the lawmakers and make the difference in this debate. I am confident that most members, who listened to your narration tonight, were convinced that they could do it too. That is the message that we have to send out so that the energies emanating from our frustration due to delays with the system, which are often times visible on IV forums, could be channelized into positive direction. We see that there are many reasons why people do not actively participate in Immigration Voice efforts. A large part of these community members could be described in two broad categories:-
(1.) Green card applicants who are totally unaware of the current situation and thus they are indifferent towards the reasoning and the depth of the problem causing delays in the system. They think that their individual applications will get approved in "few months" so there is nothing they need to do.
(2.) The victims of the retrogression come from various parts of the world.
The members who belong to this group are already disheartened with the delay of their application and have waited patiently for their turn in the line for several years. This long period of wait has made this group of people to lose faith and so they do not believe in themselves. They don't actually think that they can make any difference in this debate to facilitate anything that would change the system. Because they do not believe in themselves, these people do not also believe that others like them can do anything to change the system either. So often times they refuse to participate, not knowing that they are refusing to participate in an effort that will ultimately facilitate the change in the system.
The positive message, like the one from you on the conference call today will help more and more members to believe that they can actively participate in changing the system to change their and their families' lives. And it is this belief in our own self that will ultimately wake-up this community. I am confident that after listening to your narration on today's call, more and more members will sincerely attempt to meet their lawmakers and will educate other members about their efforts. I believe that this community has a massive potential to make the change. The only question is when would the sizable number of IV members feel motivated enough to get up to actively participate in this process to facilitate the coming change? After today's call, I believe that the answer to this question is, very soon.
Again, Thank you for actively participating in the effort and more importantly, encouraging others to participate actively. Please continue to help and motivate other members in the organization.
Regards,
Pappu on behalf of IV team
tattoo girlfriend Bleach 353 Ichigo Hollow 3 by long haired ichigo.
anurag
02-12 02:12 PM
Freakin_GC,
I am in the same boat as you. My wife was born in another country besides India, hence the Cross Chargeability. However our (Wife and my) 485s have been filed already. I am not sure how to get into the ROW boat.
All I can offer now is that I'll post whatever I hear from my lawyer. Let me know what you can find from your end.
Regards,
Anurag
I am in the same boat as you. My wife was born in another country besides India, hence the Cross Chargeability. However our (Wife and my) 485s have been filed already. I am not sure how to get into the ROW boat.
All I can offer now is that I'll post whatever I hear from my lawyer. Let me know what you can find from your end.
Regards,
Anurag
more...
pictures uses a red haired Ichigo
shirish
03-26 11:32 AM
According to my knowledge it has to be after the college. You cannot be fulltime employed and full time student at the same time.
So in nutshell. B.S + 5 years exp (After completing BS) and also the job must demand for BS + 5 years exp.Else you cannot file under EB2.
Thanks guys... I believe my experiences are "progressive" (whatever that means) in a sense that during 5 years of work I progressed accordignly and to the level that the job description / ad for my position would require BS plus 5 years of experience.
What I don't get and was not quite sure about was the fact that 2 of those 5 years were during college. 5 years of experience is 5 years - I don't get why they would not like it. It is normal for people to work full time and go to college full time. When you get hired, if you have 5 years of full time experience, the prospective employer could not care less that 2 years of that were gained during last 2 years of college.
Dunno ... with USCIS and their rules ...
I asked my lawyer (duahhaaaa) and he said it's ok ... but I don't trust him.
M.
So in nutshell. B.S + 5 years exp (After completing BS) and also the job must demand for BS + 5 years exp.Else you cannot file under EB2.
Thanks guys... I believe my experiences are "progressive" (whatever that means) in a sense that during 5 years of work I progressed accordignly and to the level that the job description / ad for my position would require BS plus 5 years of experience.
What I don't get and was not quite sure about was the fact that 2 of those 5 years were during college. 5 years of experience is 5 years - I don't get why they would not like it. It is normal for people to work full time and go to college full time. When you get hired, if you have 5 years of full time experience, the prospective employer could not care less that 2 years of that were gained during last 2 years of college.
Dunno ... with USCIS and their rules ...
I asked my lawyer (duahhaaaa) and he said it's ok ... but I don't trust him.
M.
dresses bleaching body hair
sledge_hammer
07-22 05:40 PM
No
hi guys,
i bet this question must have been asked before but i couldn't find the relevant thread so i'm asking again. Apologies if its a repeat.
I am maintaining my h1-b while my aos is pending. Last year my wife went to india while she had valid h4 (not stamped in passport) and ap documents. She did not get her visa stamped and reentered the country using the ap with no issues. He i-94 said parolled till some date, march 2009. I totally forgot about it and never renewed her ap or mine. Does it pose any kind of threat to her legal status in the us and aos?
I am still working on h1 and she is a parolee.
Thanks in advance fopr the responses.
hi guys,
i bet this question must have been asked before but i couldn't find the relevant thread so i'm asking again. Apologies if its a repeat.
I am maintaining my h1-b while my aos is pending. Last year my wife went to india while she had valid h4 (not stamped in passport) and ap documents. She did not get her visa stamped and reentered the country using the ap with no issues. He i-94 said parolled till some date, march 2009. I totally forgot about it and never renewed her ap or mine. Does it pose any kind of threat to her legal status in the us and aos?
I am still working on h1 and she is a parolee.
Thanks in advance fopr the responses.
more...
makeup long haired ichigo. a Black Tan long haired; a Black Tan long haired
reddymjm
01-08 08:56 PM
He needs to send it to the USCIS office in kentucky. you can google and get the address.
Right answer.
Right answer.
girlfriend AWWW LOOK AT THE MINI ICHIGO!
mallu
02-17 10:00 PM
I believe the spillover will come from ROW EB3
I was wondering what are the rules regarding the 'overflow' stuff. Any document ?
I was wondering what are the rules regarding the 'overflow' stuff. Any document ?
hairstyles Long-haired Ichigo spam for
losthope
06-11 12:30 AM
I think USCIS should be blamed because all those previous years visa numbers which are lost because they can't adjudicate the cases on time. We invested our time, resource and money for each and every step. We pay social security and taxes to run the economy. Most of us are here in "UNKNOWN" status but we are called resident and spent many many years.
I have mixed feeling on if government/congress is serious about fixing this issue because 10 years doesn't sound very positive.
It looks like immigration issue is hen that give golden egg ($ for the economy) Paper wok, Attorney frees postal fees gov fess etc. Does anyone would like to fix it?
Please share your thought.
1) Will the green card be worth after 10 years?
2) Is there any grantee this mess will be cleared in 10 Years?
3) Is time spent in path to immigration will be joyful and peaceful?
4) The time away from back home Close family and you may have already missed your nearest and dearest family function. your child niece, nephew and other close relative bonding that your had when you'r child and had all this which you may be sacrifice for the path to immigration
Please rethink what important and how to get an attention from the right people
I have mixed feeling on if government/congress is serious about fixing this issue because 10 years doesn't sound very positive.
It looks like immigration issue is hen that give golden egg ($ for the economy) Paper wok, Attorney frees postal fees gov fess etc. Does anyone would like to fix it?
Please share your thought.
1) Will the green card be worth after 10 years?
2) Is there any grantee this mess will be cleared in 10 Years?
3) Is time spent in path to immigration will be joyful and peaceful?
4) The time away from back home Close family and you may have already missed your nearest and dearest family function. your child niece, nephew and other close relative bonding that your had when you'r child and had all this which you may be sacrifice for the path to immigration
Please rethink what important and how to get an attention from the right people
clif
06-15 06:00 AM
:confused: My H1B is about to expire in Oct 2007 and I haven't yet filed for 7th year extension. I have approved I-140 with April 2006 PD. Should I file for 7th year ext. of H1B or I-485 or both? If I file for H1B extension, will I get 1 year ext. or 3 year ext? :confused:
LostInGCProcess
05-19 04:05 PM
You should have reported these issues within 12 months of your employement. Otherwise there is no use. All you can do is send a letter to the Wipro HR, stateing you are filing a formal complaint to the DOL and wirting to the congress man. Also tell them you are going to make sure this story highted everywhere in the Internet and media to damage WIPRO's name. I am sure they do not want to get a bad PR in this situation where everyone hates the Indian companies.
The statue of limitation is, i believe, 2 years.
The statue of limitation is, i believe, 2 years.
No comments:
Post a Comment